Cutting and Grinding Wheel Forming Machine machine
Introduction
HG-Abrasive Cutting and Grinding Wheel Forming Machine is based on the digesion and absorption of domestice and foreign advanced technologh and experience,through unremitting efforts, innovation, the launch of the latest machine,automatic multi-position fiber reinforced resin cutting & grinding wheel press machine.
From the aspects of functionality, configuration and appearance of the machine made a large update, adapt to a wider range,can better meet the customer needs, it is your right choice.
The machine adopts electric cylinder propulsion, can make the mold more stable and high speed operation, but also adopts electric cylinder scraper, compared with the traditional CAM, pull rod and other micro lifting methods, electric cylinder scraper has faster speed and stability, can be set according to the customer's different micro lifting effect. The equipment is equipped with automatic sucking, automatic putting net, automatic putting trademark hole ring, and various intelligent detection methods, which saves a lot of labor and improves the output, and the output can reach about 1300 pieces per hour.
Technical parameters:
1. Main configuration and product specifications
1.1 The machine has a total of 48 stations.
1.2 The product specifications are 115-125 resin cutting wheels.
1.3 Automatic feeding adopts hopper feeding, direct shock feeding, container measurement, the accuracy (to ensure that the sand is granular without agglomeration) single feeding can be controlled within the standard tolerance of ±1 g (volume feeding).
1.4. Automatically place the trademark and the hole ring. The trademark is absorbed by a vacuum sucker, the hole ring adopts a conveyor belt, and a strong magnetic pick-up the mould cavity is picked up is used to place the mold cavity (no stamping burrs are required for trademarks and holes).
1.5. Automatically place the mesh, and the mesh is placed in the cavity with adhesive tape (the net cloth is loose).
2. Electrical control part
2.1 The operation of the machine is controlled by PLC and the parameters are adjusted by touch screen.
2.2 The carrying manipulator translation with stepper motor, machine cylinder and pneumatic solenoid valve with AirTac;
3.Capacity:
In the case of raw materials are up to standard, the output is 1100-1200/ hour. (This should also be different according to the process requirements of each production enterprise)
Major component brands
| cylinder and air valve |
AirTAC |
| Contactor |
Schneider(France) |
| Relay |
Omron(Japan) |
| Amplifier |
YUHAO |
| PLC |
XINJE |
| Turntable |
Inverter-Delta |
| stepping motor |
MIGE |
| Servo motor |
XINJE |
| Electric cylinder |
Pneulead |
Related Products
| Packing |
Wooden boxes. Plastic film. Moisture-proof bags. Cartons on pallets. |
| Way of shipping |
By sea or By train |
| Loading port |
Qingdao/Shanghai |
After sales service:
1. The Guarantee period is 12 months after the good passed the acceptance before shipment.
2. After warranty period or other requirements during the warranty period, the customer is required to bear the related cost.
3. It is possible to send engineers to help about the installation and adjusting.
4. Phone service is always available.
What are the raw materials used?
The main materials used in world-renowned electrical components. We can also make any custom design for you according to your needs.
How long does it usually take for me to receive the equipment?
Depends on whether you want to do customization your abrasive or not, and also depends on the speed of customs clearance and logistics, but we can guarantee to ship regular abrasive machine in less than 30 business days.
Any benefits for abrasive machine from China?
In a word, China has a much better industry chain. There may be manufacturers of abrasive and packaging in India, Vietnam and Malaysia, but HG-Abrasive can guarantee that our prices can be on par with theirs and our quality, service far exceeds your expectations.
When can I get an engineer from you?
Contact our sales staff when you have completed the preparation conditions (water, electricity, air supply, production materials). We will send an engineer to install your machine and train your staff to use it. Usually, when you are ready, you can contact our sales staff and cooperate with us to get a visa for the engineer, who will arrive within 15 days.
What about the details of the packaging?
To ensure the integrity and safety of product packaging, main products are packed in plastic film or export plywood boxes, and auxiliary products are packed in thick cartons.
Do you provide customized service?
We can design the machine according to your requirements (material, power, size, etc.). We will also provide you with expert guidance at the same time, based on our many years of experience in the industry.
How will my machine be installed once it arrives? How much does it cost?
We'll dispatch an engineer to your facility to assess the situation, install the machine and train your staff on how to operate it. The customer pays for round trip airfare, accommodation and USD100/day/person.
Are you a manufacturing or a trading company?
We are a factory, and we offer factory direct prices with excellent quality and worry-free service. Please come and see us here!
What is your guarantee or warranty if we buy your machine?
We offer you a 1-5 years warranty on our high-quality machines and lifetime technical support.
Introduction
){kind=link}