Introduction:
The fully automatic single arm flap disc forming machine can achieve automatic production of product processes such as automatic back cushion placement, detection of back cushion, quantitative adhesive coating, sheet arrangement and cutting of sand belt, automatic flap forming and automatic unloading, adding protective covers to the body can better reduce the generation of dust and debris, providing a better working environment.
1. High degree of automation, can complete the entire operation on its own, saving your labor costs;
2. Multi-station rotary table is used, with stable and accurate station positioning;
3. The dispensing system adopts a water-circulating constant temperature control system, providing the simple and efficient temperature required for dispensing.
4. This equipment uses imported photoelectric sensor switches in production to ensure accurate and time-saving detection;
5. High production efficiency, the machine can produce 800-900 pieces per hour, making it easier to make money;
6. High material utilization rate, can freely set single-component adhesive and sanding belt, serving small and medium-sized enterprises;
7. Extremely low rate of defective products, the machine's rate of defective products is close to zero after adjustment. Don't worry about the production of your machine.
Technical Parameters:
| Product specifications |
Ф75mm-Ф180mm,127/T29, blade width 11mm-35mm |
| Matrix type |
Mesh cover substrate, plastic cover substrate |
| Power supply |
Pneumatic0.6-0.8mpa, electric 38OVAC |
| Rubber pump weight |
280KG |
| Gluing system |
Airtac cylinder and SMC counting control valve |
| Resin content |
4-30g accurately+ -0.5g |
| Number of product sheets |
360 ° arbitrary point layout (specific online adjustment) |
| Production speed |
6000-8000 pieces/10hours |
| Operation |
One person |
| Overall power |
7KW |
| Host size |
1600mm*1400mm*1500mm(length/width/height) |
| Gluing system |
1100mm*560mm*1800mm(length/width/height) |
Simple Performance features :
. Save labor cost
. Improve production efficiency
. Good quality products
. Stable production
. Humanization design
){kind=link}