Rpm Test Machine for Flap Disc and Cutting Disc

• Customization: Available
• Transport Package: Wooden Box
• Trademark: Kaway
• Model NO.: KWHG-1
• Origin: China
• Production Capacity: 300/Per Year

Product Description

Rpm Test Machine for flap disc and cutting disc

This flap disc and cutting disc speed test machine uses a KWHG-1 microcomputer rotary machine controller. Easy to achieve reliable digital control and good operating performance,and supper automatic recorder (optional) to achieve automatic recording of the rotation parameters.

Equipment performance and characteristics

This machine weighs 200kg. Be careful not to throw it, hit it, or shake it strongly when handling it.Tilt ≤ 30 degrees.This machine should be installed on the basis of indoor fixed, pay attention to convenient.operation and good ventilation. Nearby can not have conductive dust and gas that can corrode metal or destroy insulation. The cooling holes on the body should be kept clear.This machine uses a single-phase AC 220v power supply, voltage range 220v±10%, maximum current 15A, frequency 50Hz. Consider the load capacity of the power supply when wiring. A knife switch, air switch, or leakage protector should be installed between the unit and the power supply so that the machine can be completely isolated from the power supply. The ground of body should be installed on the ground and be reliably connected to the earth.


Main features and performance

The body adopts a box structure and strengthens the shock-absorbing design. The maximum noise is ≤ 80 dB. The mechanical and electronic double locking of the rotary box door effectively avoids accidents caused by the unintended opening of the box door during operation. Adopt special high-speed motor, rated power 1kw, speed 8000 ~ 10000 rev / min. The controller uses a wide-range switching power supply to make the control system work reliably between 180v and 260v. The automatic magnetic card driven by the DC motor automatically locks the spindle when loading and unloading the page wheel, which is stable and reliable. High-sensitivity speed sensor, the measurement range of 20 ~ 4000 rev / min, precision ± 0.01%, 
display resolution up to ± 1 rev / min.
Use a high-precision speed setter to set the speed, set the accuracy of ± 1 turn, and display accuracy ± 1 rev / min.
Delay time 8 block, range 0 ~ 9999 seconds, error ≤ ± 0.01%, digital display set time and current running time.
Spindle radial run out ≤0.03 mm. Digital thyristor trigger and relay no-load conversion greatly extend the service life of the relay High-power thyristor module, overloaded 5 times without damage.The motor is overloaded, the motor is overheated, the power module is overheated, the front door is opened, and the front door is opened. All aspects of the process are automatically protected and the relevant process is automatically performed to indicate the fault condition. At the same time,the alarm sounds.
All latching switches are non-contact electronic proximity switches, dust-proof, anti-corrosion,anti-oil, long life and high reliability. Broken sensor adopts floating detection technology, which effectively improves detection sensitivity and anti-jamming performance. The automatic recorder can print pivot data at any time for easy analysis and archiving. Simple print and full print can be set.
Fully automatic operation, highly intelligent. Automatically generate acceleration and deceleration curves and automatically start, constant speed, delay, brake, crush automatic braking and record display, the recorder automatically prints, automatic fault detection and processing. The user only needs to press the start button after setting the speed and time.
Simple Performance features :
.  Save labor cost
.  Improve production efficiency
.  Good quality products
.  Stable production
.  Humanization design
What are the raw materials used?
The main materials used in  world-renowned electrical components. We can also make any custom design for you according to your needs.

How long does it usually take for me to receive the equipment?
Depends on whether you want to customization your abrasive or not, and also depends on the speed of customs clearance and logistics, but we can guarantee to ship regular abrasive machine in less than 30 business days.

Any benefits for abrasive machine from China?
In a word, China has a much better industry chain. There may be manufacturers of abrasive and packaging in India, Vietnam and Malaysia, but HG-Abrasive can guarantee that our prices can be on par with theirs and our quality, service far exceeds your expectations.

When can I get an engineer from you?
Contact our sales staff when you have completed the preparation conditions (water, electricity, air supply, production materials). We will send an engineer to install your machine and train your staff to use it. Usually, when you are ready, you can contact our sales staff and cooperate with us to get a visa for the engineer, who will arrive within 15 days.

What about the details of the packaging?
To ensure the integrity and safety of product packaging, main products are packed in plastic film or export plywood boxes, and auxiliary products are packed in thick cartons.

Do you provide customized service?
We can design the machine according to your requirements (material, power, size, etc.). We will also provide you with expert guidance at the same time, based on our many years of experience in the industry.

How will my machine be installed once it arrives? How much does it cost?
We'll dispatch an engineer to your facility to assess the situation, install the machine and train your staff on how to operate it. The customer pays for round trip airfare, accommodation and USD100/day/person.

Are you a manufacturing or a trading company?
We are a factory, and we offer factory direct prices with excellent quality and worry-free service. Please come and see us here!

What is your guarantee or warranty if we buy your machine?
We offer you a 1-5 years warranty on our high-quality machines and lifetime technical support.