Flap Disc Testing Machine Made in China

• Customization: Available
• Condition: New
• Voltage: 380V
• Model NO.: flap disc testing machine
• Package Size: 120.00cm * 110.00cm * 120.00cm
• Package Gross Weight: 1000.000kg

Product Description

Test Machine for flap disc and cutting disc

This flap disc and cutting disc speed test machine uses a KWHG-1 microcomputer rotary machine controller. Easy to achieve reliable digital control and good operating performance,and supper automatic recorder (optional) to achieve automatic recording of the rotation parameters.

Equipment performance and characteristics

This machine weighs 200kg. Be careful not to throw it, hit it, or shake it strongly when handling it.Tilt ≤ 30 degrees.This machine should be installed on the basis of indoor fixed, pay attention to convenient.operation and good ventilation. Nearby can not have conductive dust and gas that can corrode metal or destroy insulation. The cooling holes on the body should be kept clear.This machine uses a single-phase AC 220v power supply, voltage range 220v±10%, maximum current 15A, frequency 50Hz. Consider the load capacity of the power supply when wiring. A knife switch, air switch, or leakage protector should be installed between the unit and the power supply so that the machine can be completely isolated from the power supply. The ground of body should be installed on the ground and be reliably connected to the earth.


Main features and performance

The body adopts a box structure and strengthens the shock-absorbing design. The maximum noise is ≤ 80 dB. The mechanical and electronic double locking of the rotary box door effectively avoids accidents caused by the unintended opening of the box door during operation. Adopt special high-speed motor, rated power 1kw, speed 8000 ~ 10000 rev / min. The controller uses a wide-range switching power supply to make the control system work reliably between 180v and 260v. The automatic magnetic card driven by the DC motor automatically locks the spindle when loading and unloading the page wheel, which is stable and reliable. High-sensitivity speed sensor, the measurement range of 20 ~ 4000 rev / min, precision ± 0.01%, 
display resolution up to ± 1 rev / min.
Use a high-precision speed setter to set the speed, set the accuracy of ± 1 turn, and display accuracy ± 1 rev / min.
Delay time 8 block, range 0 ~ 9999 seconds, error ≤ ± 0.01%, digital display set time and current running time.
Spindle radial run out ≤0.03 mm. Digital thyristor trigger and relay no-load conversion greatly extend the service life of the relay High-power thyristor module, overloaded 5 times without damage.The motor is overloaded, the motor is overheated, the power module is overheated, the front door is opened, and the front door is opened. All aspects of the process are automatically protected and the relevant process is automatically performed to indicate the fault condition. At the same time,the alarm sounds.
All latching switches are non-contact electronic proximity switches, dust-proof, anti-corrosion,anti-oil, long life and high reliability. Broken sensor adopts floating detection technology, which effectively improves detection sensitivity and anti-jamming performance. The automatic recorder can print pivot data at any time for easy analysis and archiving. Simple print and full print can be set.
Fully automatic operation, highly intelligent. Automatically generate acceleration and deceleration curves and automatically start, constant speed, delay, brake, crush automatic braking and record display, the recorder automatically prints, automatic fault detection and processing. The user only needs to press the start button after setting the speed and time.
Simple Performance features :
.  Save labor cost
.  Improve production efficiency
.  Good quality products
.  Stable production
.  Humanization design