Newly Upgraded Flap Disc Grinding Ratio Testing Machine

• After-sales Service: We Offer You a 1-5 Years Warranty on Our High-Qual
• Warranty: 12 Months
• Transport Package: Wooden Box
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: KWT-GR-New
• Specification: set
• Trademark: Kaway
• Origin: China
• Production Capacity: 300/Per Year

Product Description

Newly upgraded Flap disc grinding ratio testing machine-New
KWT-GR-New this equipment is special equipment for testing the grinding ratio of louver blades developed by our company (especially used in laboratories), which can test the grinding degree of the flap disc. After years of market verification, our equipment is required to be more high-end.
The louver grinding ratio test equipment can achieve 90% simulation, better simulate real-life grinding, and can uniformly control the grinding angle, strength and speed. And you can set basic data such as time, speed, and strength.
The equipment is exquisite and easy to use, and it is equipped with a protective cover and a dust and iron chip recovery device, which can be placed indoors for safe use.

Precautions:
1. When handling this product, please be careful not to drop, bump or shake it strongly. Tilt ≤ 45 degrees.
2. The machine should be installed on a fixed foundation indoors, and pay attention to easy operation and good ventilation. There should be no conductive dust and gas that can corrode metal or damage insulation nearby. The heat dissipation holes on the body should be kept unblocked, and please clean up the iron chips and dust in time after use.
3. This machine uses single-phase AC 220v power supply, the voltage range is 220v±10%, the maximum current is 20A, and the frequency is 50Hz. The load capacity of the power supply should be considered when wiring.
4. A knife switch or an air switch or a leakage protector should be installed between the machine and the power supply so that the machine can be completely isolated from the power supply. Ground wires should be installed at the feet of the body and reliably connected to the ground.
5. Without the permission of the factory, users should not disassemble the controller or motor by themselves, so as not to cause electric shock or damage to the equipment.
6. Please be sure to cover the protective cover before use.
A detailed explanation of the machine:
1. Equipment size: 1400mm*1500mm*1600mm, please place the equipment stably, due to the equipment grinding test, there may be sparks, please keep away from combustibles.

Basic specification
Flap disc Type	T27/T29 ;100mm-180mm	Voltage	220V
Power	3.5KW	Weight	300KG
Ammeter	YQAOB	Hour meter	OMRON
Rail slider	HIWIN	Air pressure	0.24-0.25MPa
Machine size	800mm*600mm*1400mm	Angle Grinder	STANLEY

Simple Performance features :
.  Save labor cost
.  Improve production efficiency
.  Good quality products
.  Stable production
.  Humanization design


What are the raw materials used?
The main materials used in world-renowned electrical components. We can also make any custom design for you according to your needs.

How long does it usually take for me to receive the equipment?
Depends on whether you want to customization your abrasive or not, and also depends on the speed of customs clearance and logistics, but we can guarantee to ship the regular abrasive machine in less than 30 business days.

Any benefits for the abrasive machine from China?
In a word, China has a much better industry chain. There may be manufacturers of abrasive and packaging in India, Vietnam and Malaysia, but HG-Abrasive can guarantee that our prices can be on par with theirs and our quality, service far exceeds your expectations.

When can I get an engineer from you?
Contact our sales staff when you have completed the preparation conditions (water, electricity, air supply, production materials). We will send an engineer to install your machine and train your staff to use it. Usually, when you are ready, you can contact our sales staff and cooperate with us to get a visa for the engineer, who will arrive within 15 days.

What about the details of the packaging?
To ensure the integrity and safety of product packaging, main products are packed in plastic film or export plywood boxes, and auxiliary products are packed in thick cartons.

Do you provide customized services?
We can design the machine according to your requirements (material, power, size, etc.). We will also provide you with expert guidance at the same time, based on our many years of experience in the industry.

How will my machine be installed once it arrives? How much does it cost?
We'll dispatch an engineer to your facility to assess the situation, install the machine and train your staff on how to operate it. The customer pays for round-trip airfare, accommodation and USD100/day/person.

Are you a manufacturing or a trading company?
We are a factory, and we offer factory direct prices with excellent quality and worry-free service. Please come and see us here!

What is your guarantee or warranty if we buy your machine?
We offer you a 1-5 years warranty on our high-quality machines and lifetime technical support.